Getting Started | 12
RADVISION | User Guide for SCOPIA XT5000 Series Version 3.0
Configuring Network Settings
This page allows you to setup the GLAN1 settings and the IP address the system uses for placing
a call.
Consult with your network administrator to configure these fields.
Before You Begin
This procedure is performed as part of the basic configuration after “Adjusting the Image
Position” on page 10.
Procedure
Step 1 Press and scroll to Yes from the Automatic IP address list.
Figure 3-5 Defining IP Settings
Step 2
Configure the IP addresses.
Step 3 Press Close to exit the quick setup wizard.
Comments to this Manuals