RADVision Scopia Elite 5100 Series Specifications Page 34

  • Download
  • Add to my manuals
  • Print
  • Page
    / 77
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 33
Maintaining the SCOPIA Elite 5100 Series MCU | 29
RADVISION | Administrator Guide for SCOPIA Elite 5100 Series MCU Version 7.7
Restoring Your Configuration
You can import the settings of a saved MCU configuration file from a storage device on your
network. You can use the saved configuration file to restore the settings to the current MCU or to
configure another MCU.
The imported file is a .zip file that includes a .val file and a .xml file.
Note: If you are importing a configuration setup from a different MCU that has different login credentials,
you will need to enter these new credentials to access the MCU.
Procedure
Step 1
Select the icon in the MCU administrator interface.
Step 2 Select Restore configuration.
Step 3 Select Browse.
Step 4 Navigate to and select the configuration file (.zip) you want to import.
Step 5 Select Restore.
Step 6 Select Continue to upload the new configuration settings.
The restore procedure causes all current configuration to be permanently lost.
The system restarts automatically.
All active conferences are disconnected.
Step 7 Select OK to complete the restore procedure.
Upgrading Software
Perform this procedure to upgrade from version 7.1 to version 7.5 or from version 7.5/7.6 to later
versions.
Do not upgrade MCU software remotely. The MCU and the computer you are using to upgrade
should be on the same physical network.
Upgrading from version 7.1 to version 7.5 requires a new license key. If you do not have the
license key, you can still upgrade and use a 30-day temporary license. You must update the MCU
with the permanent license before this period of time expires. Contact
RADVISION Customer
Support for obtaining a license key.
Upgrading from version 7.1 to version 7.5 may take up to 30 minutes. Upgrading from version
7.5/7.6 to a later version normally takes 15 minutes.
Page view 33
1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 76 77

Comments to this Manuals

No comments