RADVision Scopia Elite 5100 Series Specifications download pdf (Page 42)

Maintaining the SCOPIA Elite 5100 Series MCU | 37

RADVISION | Administrator Guide for SCOPIA Elite 5100 Series MCU Version 7.7

Step 4 Select Execute.

Note: After selecting Execute, a warning message appears, notifying you that the unit will be

reset and any active conferences will be disconnected.

Step 5 Select Yes to continue.

Step 6 Select Close.

Note: After applying the new port value, you must enter it as a suffix to the MCU IP address in

order to access the web server.

For example, if your new HTTP port value is 8080, access the web server by entering the

following:

http://<URL>:8080

Configuring the UDP Port for RAS on the SCOPIA Elite MCU

The SCOPIA Elite MCU 5000 Series has designated port 1719 for RAS. You can configure a different

port to use RAS (for example, if port 1719 is busy). Port 1719 is also used to communicate with

the gatekeeper (to configure the UDP port for the gatekeeper, see “Configuring the UDP Port for

the Gatekeeper on the SCOPIA Elite MCU” on page 38).

Note: If you close port 1719, you must configure another port for both RAS and the gatekeeper. If you

configure a different port for RAS, you do not need to configure a different port for the gatekeeper.

Procedure

Step 1 Navigate to the MCU Advanced Commands section by doing the following:

a. Select the icon.

b. Select Advanced parameters.

c. Locate the H323 RAS port number in the Name column (see Figure 3-29 on page 38).

1 2 ... 37 38 39 40 41 42 43 44 45 46 47 ... 76 77

No comments

RADVision Scopia Elite 5100 Series Specifications Page 42