RADVision Scopia XT1000 Installation Guide download pdf (Page 13)

'Hardware Setup' | 9

RADVISION | Installation Guide for SCOPIA XT1000 Version 2.0

Setting Up the SCOPIA XT1000

Installing the Codec Unit

Vertical Mounting

The Codec Unit can operate in vertical (or horizontal) position.

Procedure

Step 1 Remove the cover on the left side of the Codec Unit and insert it into its base.

Step 2 Using a flat-blade screwdriver fully turn the connecting screw on the base until it is completely

secured.

Figure 2-2 Codec Unit Vertical Mounting

Step 3 With the codec in vertical position we recommend to use the support fairlead to avoid cable

weight issues.

Horizontal Mounting

The XT1000 Codec Unit can operate in horizontal (or vertical) position.

Place the XT1000 Codec Unit on a horizontal surface which stands firmly on its base.

The surface must be dry and free of dust, oil and other residues.

Connecting the System

Figure 2-3 shows possible connections to the Codec Unit.

Note: CAUTION: Make sure all units are switched off whenever connecting or disconnecting devices.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 28 29

No comments

RADVision Scopia XT1000 Installation Guide Page 13