Figure 4-10 Pinout Diagram
Step 2
Connect the VISCA Cross cable from the main camera VISCA OUT to the optional camera
VISCA IN.
Check that the SYSTEM SELECT switch on the back panel of the camera is set to 7.
Using a DVD or Blu-ray Player
You may connect a DVD or Blu-ray player to the HD CAM or DVI inputs of the XT Codec Unit.
Be aware that SCOPIA XT Series supports HDCP (High-bandwidth Digital Content Protection).
As an HDCP Licensee, you may not use a digitally protected content on a device that copies
HDCP content and you may not send digitally protected content to non-HDCP devices.
If the XT Codec Unit detects that non-compliant devices are attached to one of the HD CAM
inputs, the video is locked.
Connecting Analog Video Equipment
The XT Codec Unit features digital inputs and outputs.
If the room configuration requires analog video inputs or outputs, use an external analog-to-
digital (or vice-versa) video converter.
RADVISION has tested and certified these two video converters from Gefen:
•
GTV-COMPSVID-2-HDMIS, Composite/S-Video to HDMI Scaler
•
GTV-HDMI-2-COMPSVIDS, HDMI to Composite/S-Video Scaler
See the company’s site for documentation.
For example, you might need to connect an analog camera to the XT Codec Unit.
Connect the analog camera to HD CAM or DVI using the Composite/S-Video to HDMI Scaler.
RADVISION | Installation Guide for SCOPIA XT5000 Series Version 3.1 Setting up the SCOPIA XT Series | 34
Comments to this Manuals