RADVision Scopia XT5000 Series Installation Guide download pdf (Page 114)

Figure 67: Configuring IP addresses from the web interface

5. Set the fields as described in Table 27: Configuring IP addresses on page 114.

Table 27: Configuring IP addresses

Field Name Description

MAC Address This setting cannot be changed.

Automatic IP

Address

Set to Yes (default) if the system gets its IP address automatically.

Set to No if you must set up a public IP address in the IP address

field. The other fields in this page become configurable. This is

required, for example, if the XT Endpoint is connected directly to the

Internet, without any address translation, or when other external

endpoints need to dial to this endpoint as an MCU.

To secure SIP connections using TLS certificates, your system

must have a static IP address, since the system generates the

certificate request using its IP address as the Common Name (CN).

For more information, see Securing Connections to the XT

Endpoint Using TLS on page 131.

IP Address If the system gets its IP address automatically, indicates the IP

address assigned to the system.

Otherwise, enter the system static IP address here.

Subnet Mask If the system gets its IP address automatically, this field indicates

the subnet mask assigned to the system.

If you entered the system’s IP address manually, type the subnet

mask.

Installation Guide for Scopia XT5000 Endpoint with Embedded

Server for IP Office Version 3.2

Initial Configuration | 114

1 2 ... 109 110 111 112 113 114 115 116 117 118 119 ... 158 159

No comments

RADVision Scopia XT5000 Series Installation Guide Page 114