RADVision Scopia XT5000 Series Installation Guide download pdf (Page 90)

From the web interface only, re-enter your new PIN in the Confirm PIN Code field.

4. Save your changes as follows:

•

From the endpoint, select Done.

•

From the web interface, select Save.

Use this PIN the next time you are accessing advanced settings.

Setting Date and Time

About this task

You can set the date and time from either the endpoint or the web interface.

Before you begin

If configuring from the endpoint, you must first enable advanced configuration, as described in

Maintaining the XT Endpoint Locally from the Endpoint on page 66.

Procedure

1. Access the date and time settings as follows:

•

From the XT Endpoint web interface, select Administrator Settings > System > Date

& Time > General.

•

From the endpoint's main menu, select Configure > Advanced > System > Date &

Time > General.

You need to enter the PIN required to access the Advanced settings. The default PIN

is 1234.

2. Set the date and time, as described in Table 16: Configuring date and time settings on page

90.

Important:

If you configure set Internet time to Yes , you cannot modify the date and time fields.

Table 16: Configuring date and time settings

Field Name Description

Day Enter the date.

Month Enter the month.

Year Enter the year.

Hour Enter the hour.

Minutes Enter the minutes.

Internet time Select Yes to synchronize the system clock with the network clock,

thus allowing you to align devices connected to the Internet using

NTP.

Installation Guide for Scopia XT5000 Endpoint with Embedded

Server for IP Office Version 3.2

Initial Configuration | 90

1 2 ... 85 86 87 88 89 90 91 92 93 94 95 ... 158 159

No comments

RADVision Scopia XT5000 Series Installation Guide Page 90