RADVision SCOPIA XT4000 Series User's Guide download pdf (Page 32)

Figure 20: Defining IP Settings

2. Enter the following values:

Table 4: Configuring the IP address

Field Name Description

IP Address Mode or

Automatic IP Address

Determines if the IP address is dynamically allocated (using DHCP), or if

you manually designate a static IP address. You must use only static

addresses for:

• Scopia

XT Telepresence deployments

• Units on a public network

• SIP deployments where the unit is secured with a TLS certificate.

IP address Enter the system static IP address. For dynamic IP addresses, this field

displays the current IP address.

Subnet mask Enter the subnet mask associated with the IP address. For dynamic IP

addresses, this field displays the current subnet mask.

Gateway (IP Address) Enter the default gateway static IP address. The gateway is used to route

information between two subnets, for example, between the headquarters

and a partner site. For dynamic IP addresses, this field displays the

current gateway IP address.

DNS (Server IP

Address)

Enter the DNS server IP address. The DNS server translates domain

names into IP addresses. For dynamic IP addresses, this field displays

the assigned DNS server IP address.

3. Select Next and continue with one of the following, depending on whether you are

registering your endpoint to a gatekeeper or SIP server:

• If you are registering your endpoint to a gatekeeper, continue with Configuring Basic

Gatekeeper Settings on page 33.

• If you are only registering your endpoint to a SIP server (and not a gatekeeper), continue

with Configuring Basic SIP Settings on page 34.

Getting Started

32 Avaya Scopia

XT Series User Guide April 2015

1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 107 108

No comments

RADVision SCOPIA XT4000 Series User's Guide Page 32