RADVision SCOPIA XT4000 Series User's Guide download pdf (Page 51)

Moving the PTZ Camera's Position

About this task

This section details how to set the angle and zoom of a PTZ camera connected to your Avaya

Scopia

XT Series.

A PTZ camera can pan to swivel horizontally, tilt to move vertically, and optically zoom to devote all

the camera's pixels to one area of the image. For example, the XT Standard Camera is a PTZ

camera with its own power supply and remote control, and uses powerful lenses to achieve superb

visual quality. In contrast, fixed cameras like webcams only offer digital PTZ, where the zoom crops

the camera image, displaying only a portion of the original, resulting in fewer pixels of the zoomed

image, which effectively lowers the resolution. Fixed cameras also offer digital pan and tilt only after

zooming, where you can pan up to the width or length of the original camera image.

Once you have set the camera's angle and zoom, the system restores the last camera position the

next time you use the camera. You can store multiple preset camera positions if needed (see

Deployment Guide for Avaya Scopia

XT Series).

Procedure

1. Access the camera control settings. From the XT Series web interface, select More

Actions > Cameras Control. From the endpoint's main menu, select Control Camera.

During a meeting, press ok/menu to access the videoconference menu (

Figure 46:

Controlling your camera on page 51), and then select Control Camera.

Figure 46: Controlling your camera

2. If you have more than one camera, first select the one you want to move. From the XT

Series web interface, select the Cameras field. From the endpoint's main menu, select

Control Camera > ok/menu > Video Source. Press ok/menu repeatedly to switch between

cameras.

Moving the PTZ Camera's Position

April 2015 Avaya Scopia

XT Series User Guide 51

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 107 108

No comments

RADVision SCOPIA XT4000 Series User's Guide Page 51